Tap on the Controller tab. This is the seventh tab on top of the screen. Tap on Settings. This is the second tab on top of the screen. Turn on Enable controller support feature. You can do this by If the LED light on your PS4 controller is blinking white, it's due to one of two reasons: The battery is dying. Plug the controller directly into the console to let it charge. It can take up to two hours for the battery to charge completely. If your PS4 controller won't charge, it could be an issue with the charging port, charging cable, or Open the VDX via Steam, it will recognize it as an Xbox controller so select DualShock 4 and click conect, after that open the PS4 Remote Play via Steam and it will work normally, unfortunately that way Rumble and Motion Controls don't work either. Unfortunately all modes require a PC with the PS4 Remote Play open, but it is a good alternative Plug the included Wireless USB Dongle into your PS5™ console, PS4™ console, or PC. The LED on the dongle will begin flashing purple. 3. Press and release the PS Button on the front of the Pro BFG Controller. 4. Once connected, the X-Logo on the controller and the LED on the dongle will be illuminated solid purple. 5. Remove the back piece of the controller. Pull the controller apart from the indent on the bottom between the analog sticks. Gently remove the back of the controller by jiggling it up and forward. Take care not to pop the buttons off. [12] Spray the back piece with a surface cleaner and dry cloth if it's dirty. 4. To do that: Open System Preferences > Bluetooth. Press the PS and Share buttons simultaneously on your controller until you see a light on your DualShock 4 start blinking to indicate that it’s ready to pair. Look for the wireless controller in the list of Bluetooth devices on your Mac. 1. Firstly, you need to ensure that the controller is turned off. 2. After that, on your controller, click and hold the “Share” + “PS” buttons until the LED player status determinative begins to flash. 3. Lastly, on the USB Bluetooth receiver, click the SYNC button (the sync LED will flash). In a simple way. It wants me to connect a Dualshock 4 controller using a usb cable and the press the PS button. I don't have a real Dualshock 4 controller. I used a Nacon Revolution Unlimited Pro controller (wired usb) and it does not recognize the PS button when pressed. I also used my PS3 move controller (wired usb) and it also does not recognize the PS Step 1 Connect Cronus Zen to the PlayStation 4. Before you begin, make sure you are updated to the latest versions of Cronus Zen firmware and Zen Studio software. Turn on the PlayStation 4 with the consoles power button. Connect the short (12″) micro-USB cable to the back of the Zen. Connect the other end of the USB cable to the PS4. anb6.

how to connect ps4 controller to ps4 pro